Related products
live a message
Hastelloy C-22 Alloy 22 (UNS N06022; W. Nr. 2.4602; NiCr21Mo14W) is a fully austenitic advanced corrosion-resistant alloy that offers resistance to both aqueous corrosion and attack at elevated temperatures.
Hastelloy C-22 Alloy 22 (UNS N06022; W. Nr. 2.4602; NiCr21Mo14W) is a fully austenitic advanced corrosion-resistant alloy that offers resistance to both aqueous corrosion and attack at elevated temperatures. This alloy provides exceptional resistance to general corrosion, pitting, crevice corrosion, intergranular attack, and stress corrosion cracking. Alloy 22 has found numerous applications in the chemical/petrochemical processing, pollution control (flue gas desulfurization), power, marine, pulp and paper processing, and waste disposal industries.
Alloy 22 is nickel-base and typically contains 22% chromium, 14% molybdenum, and 3% tungsten. Iron is normally limited to less than 3%. The alloy’s high content of chromium gives it good resistance to wet corrosion by oxidizing media (e.g., nitric acid and ferric and cupric salts). Its contents of molybdenum and tungsten give the alloy resistance to wet reducing media (e.g., sulfuric and hydrochloric acids). Alloy 22 exhibits excellent resistance to corrosive attack by seawater under stagnant and flowing conditions.
At elevated temperatures, the high chromium level of Hastelloy C-22 Alloy helps it resist oxidation, carburization, and sulfidation. Since it is nickel-base, alloy 22 resists high temperature attack by halides (e.g., chlorides and fluorides). With these attributes, the alloy is widely used to protect steel tubes and other components in coal-fired and waste-to-energy boilers.
Available Product Forms:
Pipe, tube, fitting, flange, sheet, strip, plate, round bar, flat bar, fastener, forging stock, hexagon and wire
Alloy | UNS | EN Number | Cr | Ni | Mo | N | PRE Number | |
---|---|---|---|---|---|---|---|---|
625 | N06626 | 2.4856 | 20.0-23.0 | 58 | 8.0-10.0 | - | 41 | Nickel |
C-276 | N10276 | 2.4819 | 14.5-16.5 | 57 | 15.0-17.0 | - | 45 | Nickel |
C-22® | N06022 | 2.4602 | 20.0-22.5 | 56 | 12.5-14.5 | - | 46 | Nickel |
BPE Surface Finish Code | CSI Surface Finish Code | Product Contact Surface (Max Ra)* | Product Contact Surface Finish Treatment (ID) | Non-Product Contact Surface (Max Ra) | Non-Product Contact Surface Finish Treatment (OD) | Dimensions & Tolerances (BPE) or (CSI) |
---|---|---|---|---|---|---|
N/A | PU | N/A | Unpolished (Mill) | N/A | Unpolished (Mill) | CSI |
SF1 | PL | 20 µ-inch (0.51 µm) | Polished or Drawn | 32 µ-inch (0.81 µm) | Mechanical Polish | BPE |
SF5 | PO | 20 µ-inch (0.51 µm) | Electropolished | 32 µ-inch (0.81 µm) | Mechanical Polish | BPE |
SF6 | P25 | 25 µ-inch (0.64 µm) | Electropolished | 32 µ-inch (0.81 µm) | Mechanical Polish | BPE |
Material | Inconel,Hastelloy,Monel,Incoloy,GH,Precision alloy,Stainless steel | |
Standard | GB,AISI,ASTM,DIN,EN,SUS,UNS etc | |
Shape | Sheet ,Coil, Bar,Pipe,Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square | |
Surface | Mirror,Brushed,Mil Finished,Polished etc | |
Material Grade | Inconel | Inconel600(N06600 GH3600), Inconel601(N06601 GH3600), Inconel625(N06625 GH3625), InconelX-750(N07750 GH4145), Inconel 718(N07718 GH4169), Inconel690 |
Hastelloy | Hastelloy B-2,Hastelloy C,Hastelloy C-267(N10276),Hastelloy C-4, Hastelloy C-22(N06022),Hastelloy G30(N06030) | |
Monel | Monel 400(N04400),Monel K500(N05500) | |
Incoloy | Incoloy A-286(GH2132 N662),Incoloy800 800H 800HT,Incoloy725, Incoloy825,Incoloy925,Incoloy926(N08926 1.4529) | |
GH | GH2132(N66286 A286 Gr6),GH3625(Inconel625 UNS N0), GH4169(Inconel718 UNS N0),GH3030,GH3039,GH4033,GH3128 | |
Precision alloy | 4J36,4J29,1J79 | |
Stainless steel | Alloy 20(N08020),904L(N08904),254SMo(F44 S31254) | |
Specification | Sheet | Thickness 0.8-36mm; Width 650-2000mm; Length 800-4500mm |
Strip | 0.05*5.0-5.0*250mm | |
Pipe | φ 6-273mm; Thickness 1-30mm; Length 1000-8000mm | |
Bar | φ4-50mm; Length 2000-5000mm | |
Wire | 0.01-10mm | |
Application | It is widely used in high-temperature and electric industry, medical devices, construction, chemistry, food industry, agriculture, and ship components. It also applies to food and beverage packaging, kitchen supplies, trains, aircraft, conveyor belts, vehicles, bolts, nuts, springs, and screen mesh etc | |
Trade Terms | EXW,FOB,CIF CFR | |
Loading Port | Shanghai port, Tianjin port, Qindao port | |
Payment terms | 1) 30% deposit by T/T, the balance against copy of B/L by T/T. | |
2) 30% deposit by T/T, the balance by L/C at sight. | ||
3) 100% L/C at sight. | ||
MOQ | 1Ton | |
Packing Detail | Standard Seaworthy Package or customer requirements | |
Delivery time | 1.Usually,within10-20days after receiving deposit or LC. 2.According to the order quantity | |
Samples | Free samples are provided but the fright is borne by the buyer |
We are happy to answer any questions you have regarding our product lines and services. Please tell us a little more about yourself and we will have someone contact you as soon as possible.
Speak to a Steel ExperthasloyB-3 alloy steel pipe | hasloyG-3 alloy steel pipe |
hasloyC alloy steel pipe | hasloyG30 alloy steel pipe |
hasloyC-4 alloy steel pipe | hasloyX alloy steel pipe |
hasloyC-22 alloy steel pipe | hasloyHX alloy steel pipe |
hasloyC-276 alloy steel pipe | GH1140 high temperature alloy steel pipe |
hasloy C-2000 alloy steel pipe | GH2132 high temperature alloy steel pipe |