Related products
live a message
ASTM A210 tubing is a medium carbon steel Seamless Tubing used in boilers, boiler flues, super heaters, ASTM A210 / ASME SA210 is available in A210 Grade A1, and A210 Grade C. The ASTM A210 Specifications are listed below with the Chemical Composition and Mechanical Properties.
ASTM A210/ASME SA210 specification covers seamless medium-carbon steel boiler and superheater tubes. The specification also covers minimum-wall-thickness, tubing sizes, boiler flues including safe ends, arch and stay tubes. The specification provides tensile and hardness properties but only applicable to certain size limitations. Material manufacturing shall be killed. Tubes shall be made by seamless process, marked as either hot-finished or cold-finished. Surface condition shall be specifically stated in the order. Chemical composition shall conform to the requirements. Elemental composition other than listed here shall not be permitted. Tension test, flattening test, flaring test, hardness test, hydrostatic or nondestructive electric test shall be made on specimens. Superheater tubes shall be formed without defects and shall withstand expansion, beading, forging, welding, and bending.
ASTM A210 is the standard covers seamless medium-carbon steel boiler and superheater tubes. Seamless medium carbon steel pipe for boiler tube and boiler flue pipe, including a minimum wall thickness of the security side, the dome and the support tube and superheater tubes.
ASTM A210 Pipes Application
For high, middle, low pressure boiler and pressure purpose
ASTM A210 / A210M Flattening Test
One flattening test shall be made on specimens from each end of one finished tube from each lot, but not the one used for the flaring test. Tears or breaks occurring at the 12 or 6 o’clock positions on Grade C tubing with sizes of 2.375 in. [60.3 mm] in outside diameter and smaller shall not be considered a basis for rejection.
ASTM A210 / A210M Flaring Test
One flaring test shall be made on specie- men from each end of the one finished tube from each lot, but not the one used for the flattening test.
Grade | C(Max) | Mn | Si(Min) | P(Max) | S(Max) |
A1 | 0.27 | Max 0.93 | 0.10 | 0.035 | 0.035 |
Grade | Tensile Strength(Mpa) | Yield Strength(Mpa) | Elongation(%) |
A1 | ≥415 | ≥255 | ≥30 |
A120 Seamless Pipe Standards | ASTM, ASME and API |
ASTM A120 Carbon Steel Pipe Size | 1/2” NB to 36” NB |
ASME Sa210 Pipe Thickness | 3-12mm |
ASTM A210 Pipe A210/a210m Schedules | SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules |
ASTM A210 Pipe A1 Origin | Chinese |
ASME Sa210 Pipe Tolerance | Cold drawn pipe: +/-0.1mm Cold rolled pipe: +/-0.05mm |
A210 Carbon Steel Tube Craft | Cold rolled and Cold drawn |
Sa210 Grade C Pipe Type | Seamless / ERW / Welded / Fabricated |
ASTM A210 Gr A1 Pipe Form | Round, Hydraulic Etc |
ASME Sa210m Pipe Length | Min 3 Meters, Max18 Meters, or according to customer’s requirement |
ASME Sa210 Gr A1 Pipe End | Plain End, Beveled End, Treaded |
ASTM A210 Pipe Specialized in | Large Diameter SA210 Pipe |
ASME Sa210a1 Pipe Additional Testing | NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, H2 SERVICE, IBR, etc. |
We are happy to answer any questions you have regarding our product lines and services. Please tell us a little more about yourself and we will have someone contact you as soon as possible.
Speak to a Steel ExpertASTM A106 Grade B Carbon Steel Pipe | ASTM A161 Carbon Steel Pipe |
EN 10216-2 P235 GH Carbon Steel Pipe | ASTM A178 Carbon Steel Pipe |
ASTM A120 Carbon Steel Pipe | ASTM A179 Carbon Steel Pipe |
ASTM A134 Carbon Steel Pipe | ASTM A192 Carbon Steel Pipe |
ASTM A135 Carbon Steel Pipe | ASTM A199 Carbon Steel Pipe |
ASTM A139 Carbon Steel Pipe | ASTM A210 Carbon Steel Pipe |