Product catalogue
Related products
live a message
NS111 alloy has excellent corrosion resistance and excellent corrosion resistance in seawater, fresh water, and industrial wastewater. The pitting corrosion resistance of this alloy is better than H2S (equivalent to ASTM A3 ≤ 50PPM), and the Crevice corrosion resistance is equivalent to ASTM A3, superior to ASTM B4 (i.e. C1 ≤ 100PPM).
Superalloy is a kind of Metalloid material, which is composed of elements such as chromium, molybdenum, cobalt, nickel, iron, aluminum, copper, titanium, tungsten, boron, cerium, zirconium, etc., and has excellent high-temperature oxidation resistance, excellent heat resistance, corrosion resistance, fatigue resistance, good tensile property, Fracture toughness and other comprehensive properties. Also known as "super alloy", it can work in extreme environments for a long time. Therefore, it is widely used in aerospace, marine ships, petrochemical The nuclear industry and energy sectors.
NS111 alloy has excellent corrosion resistance and excellent corrosion resistance in seawater, fresh water, and industrial wastewater. The pitting corrosion resistance of this alloy is better than H2S (equivalent to ASTM A3 ≤ 50PPM), and the Crevice corrosion resistance is equivalent to ASTM A3, superior to ASTM B4 (i.e. C1 ≤ 100PPM).
Cold working
1. The work hardening rate is greater than that of austenitic stainless steel, so it is necessary to select processing equipment. Cold worked materials should be in the solution heat treated state, and intermediate annealing should be carried out when the cold work volume is large.
2. If the cold processing amount is greater than 10%, the workpiece needs to undergo secondary solid solution treatment.
Hot working
1. The temperature range is 1200 ℃~950 ℃, and the cooling method is water quenching or rapid air cooling.
2. In order to obtain the best performance and creep resistance, solution treatment should be carried out after Hot working.
3. The materials can be directly sent into the furnace that has been heated to 1200 ℃, and the furnace can be quickly discharged after holding for enough time, and Hot working can be carried out within the specified temperature range. When the material temperature drops below the Hot working temperature, it needs to be reheated.
| % | C | Si | Mn | Cr | Ni | Al | Ti | Cu | P | S | Fe | |||||
| Min | 19 | 30 | 0.15 | 0.15 | 0.15 | |||||||||||
| Max | 0.1 | 1 | 1.5 | 23 | 35 | 0.6 | 0.6 | 0.75 | 0.03 | 0.015 | allowance | |||||
| 0.2%Compression strength (N/mm²) | Tensile strength (N/mm²) | Elongation (%) | Hardness | |||||||||||||
| (HV) | (HB) | |||||||||||||||
| ≥205 | ≥520 | ≥30 | ≤ 182 | ≤ 179 | ||||||||||||
| ASTM B409/UNS N08800 | ||||||||||||||||
| 0.2%Compression strength (N/mm²) | Tensile strength (N/mm²) | Elongation (%) | Hardness | |||||||||||||
| (HV) | (HB) | |||||||||||||||
| ≥205 | ≥520 | ≥30 | ||||||||||||||
| EN10095/1.4876 | ||||||||||||||||
| 0.2%Compression strength (N/mm²) | Tensile strength (N/mm²) | Elongation (%) | Hardness | |||||||||||||
| (HV) | (HB) | |||||||||||||||
| ≥ 170 | 450-680 | ≥ 30 | ≤ 192 | |||||||||||||
| Material | Inconel,Hastelloy,Monel,Incoloy,GH,Precision alloy,Stainless steel | |
| Standard | GB,AISI,ASTM,DIN,EN,SUS,UNS etc | |
| Shape | Sheet ,Coil, Bar,Pipe,Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square | |
| Surface | Mirror,Brushed,Mil Finished,Polished etc | |
| Material Grade | Inconel | Inconel600(N06600 GH3600), Inconel601(N06601 GH3600), Inconel625(N06625 GH3625), InconelX-750(N07750 GH4145), Inconel 718(N07718 GH4169), Inconel690 |
| Hastelloy | Hastelloy B-2,Hastelloy C,Hastelloy C-267(N10276),Hastelloy C-4, Hastelloy C-22(N06022),Hastelloy G30(N06030) | |
| Monel | Monel 400(N04400),Monel K500(N05500) | |
| Incoloy | Incoloy A-286(GH2132 N662),Incoloy800 800H 800HT,Incoloy725, Incoloy825,Incoloy925,Incoloy926(N08926 1.4529) | |
| GH | GH2132(N66286 A286 Gr6),GH3625(Inconel625 UNS N0), GH4169(Inconel718 UNS N0),GH3030,GH3039,GH4033,GH3128 | |
| Precision alloy | 4J36,4J29,1J79 | |
| Stainless steel | Alloy 20(N08020),904L(N08904),254SMo(F44 S31254) | |
| Specification | Sheet | Thickness 0.8-36mm; Width 650-2000mm; Length 800-4500mm |
| Strip | 0.05*5.0-5.0*250mm | |
| Pipe | φ 6-273mm; Thickness 1-30mm; Length 1000-8000mm | |
| Bar | φ4-50mm; Length 2000-5000mm | |
| Wire | 0.01-10mm | |
| Application | It is widely used in high-temperature and electric industry, medical devices, construction, chemistry, food industry, agriculture, and ship components. It also applies to food and beverage packaging, kitchen supplies, trains, aircraft, conveyor belts, vehicles, bolts, nuts, springs, and screen mesh etc | |
| Trade Terms | EXW,FOB,CIF CFR | |
| Loading Port | Shanghai port, Tianjin port, Qindao port | |
| Payment terms | 1) 30% deposit by T/T, the balance against copy of B/L by T/T. | |
| 2) 30% deposit by T/T, the balance by L/C at sight. | ||
| 3) 100% L/C at sight. | ||
| MOQ | 1Ton | |
| Packing Detail | Standard Seaworthy Package or customer requirements | |
| Delivery time | 1.Usually,within10-20days after receiving deposit or LC. 2.According to the order quantity | |
| Samples | Free samples are provided but the fright is borne by the buyer | |
We are happy to answer any questions you have regarding our product lines and services. Please tell us a little more about yourself and we will have someone contact you as soon as possible.
Speak to a Steel Expert
| GH3128 high temperature alloy steel pipe | NS111 corrosion resistant alloy steel pipe |
| GH3030 high temperature alloy steel pipe | NS112 corrosion resistant alloy steel pipe |
| GH3044 high temperature alloy steel pipe | NS113 corrosion resistant alloy steel pipe |
| GH4145 high temperature alloy steel pipe | NS142 corrosion resistant alloy steel pipe |
| GH4146 high temperature alloy steel pipe | NS143 corrosion resistant alloy steel pipe |
| GH4169 high temperature alloy steel pipe | NS312 corrosion resistant alloy steel pipe |
Liaocheng Economic and Technological Development Zone, Shandong Province, China
WeChat
home
